If the volumes of two cubes are in the ratio 27 : 1, the ratio of their edges is:
View explanation
The edge ratio is the cube root of the volume ratio, cube root of 27 : 1 = 3 : 1.
FPSC · Other · N/A
Solved volume and surface area MCQs — 48 questions on cubes, cylinders and cones: volumes, curved and total surface areas, hollow pipes and rollers, wire drawing, melting coins and cone-in-cube problems, with verified answers and explanations. Free online practice for FPSC, PPSC, NTS and all one-paper exams. Covers volume and surface area.
Paper Snapshot
Questions
48
Time
48
Minutes
Subjects
1
Topics
3
Read mode shows correct answers. Attempt mode hides answers, starts timer, and shows your result after submission.
About this paper
Arithmetic: Volume and Surface Area — Solved MCQs — 48 solved MCQs with verified answers and an explanation for every question, grouped by subject and topic. This is a GK360 practice set prepared for exam preparation — it is not an official past paper.
Paper Controls
Subject 1
Topic Section
5 solved MCQs shown directly below
The edge ratio is the cube root of the volume ratio, cube root of 27 : 1 = 3 : 1.
The edges are in the ratio 2 : 3, so the surface areas are in the ratio 2 squared : 3 squared = 4 : 9.
The edges are in the ratio 1 : 3, so the face areas are in the ratio 1 squared : 3 squared = 1 : 9.
Volume scales with the cube of the edge, so doubling the edge multiplies the volume by 2 cubed = 8.
The surface area scales with the square of the edge, so 1.25 squared = 1.5625, an increase of 56.25%.
Topic Section
23 solved MCQs shown directly below
The radius is 1 m, so the volume is pi x 1 squared x 14 = 44 m3 (the book prints m2 in the options; the unit should be m3).
The volume is 0.2464 m3, so pi x r squared x 4 = 0.2464 gives r = 0.14 m and diameter 0.28 m, which is not among the offered values — hence None of these. The printed key letter "e" does not exist among the four options.
From 2 pi r = 66, r = 10.5 cm, and from 2 pi r h = 2640, h = 40 cm, so the volume is pi x 10.5 squared x 40 = 13860 cm3.
Total surface area over lateral surface area = (r + h) over h = 80 over 60 = 4 : 3.
The square tin holds 8 x 8 x 14 = 896 cm3 and the circular tin holds pi x 4 squared x 14 = 704 cm3, so the difference is 192 cm3.
With r = 2x and h = 3x, pi x 4x squared x 3x = 12936 gives x = 7, so r = 14 cm and h = 21 cm, and the total surface area is 2 pi x 14 x 35 = 3080 cm2.
For an open cylinder the interior area is the curved surface plus one base, 5 pi r squared = 616, so r squared = 39.2 and h = 2r; the volume is pi x 39.2 x 2r, about 1540 cm3, about 1.5 litres.
From 2 pi r (r + h) = 1628 with r + h = 37, r = 7 m and h = 30 m, so the volume is pi x 49 x 30 = 4620 m3.
Radius = 2 x volume over curved surface area = 1848 over 264 = 7 m, so the diameter is 14 m, and the height is 264 over (2 pi x 7) = 6 m, giving 14 : 6 = 7 : 3.
For a given volume the surface area is minimised when the height equals the diameter.
Volume scales with the square of the radius, so halving the radius quarters the volume, a ratio of 1 : 4.
Volume ratio = (2 squared x 5) : (3 squared x 3) = 20 : 27.
With equal volumes, radius squared is inversely proportional to height, so the radius ratio is sqrt 2 : 1.
Halving the diameter quarters the volume and doubling the height doubles it again, so the new volume is one quarter times 2 = half the volume of Y.
With volume fixed, length is inversely proportional to radius squared, so radius over 3 gives length times 9.
The half-full cross-section is half of pi x 3.5 squared = 19.25 cm2, and at 200 cm per second for 600 seconds that discharges 19.25 x 200 x 600 = 2310000 cm3 = 2310 litres. The keyed 4620 litres is the full-pipe figure.
The cylinder volume is pi x 9 x 8 = 72 pi and each coin is pi x 0.5625 x 0.2 = 0.1125 pi, so 72 over 0.1125 = 640 coins.
The total volume is pi x (225 x 35 + 100 x 15) = 9375 pi, so pi x R squared x 15 = 9375 pi gives R squared = 625 and R = 25 cm.
The wire radius is 0.05 cm, so its cross-section is pi x 0.0025 cm2 and the length is 66 over that area = 8400 cm = 84 m.
The external radius is 5.6 + 0.4 = 6 cm, so the metal volume is pi x (36 - 31.36) x 21 = 306.24 cm3.
The hollow cylinder volume is pi x (36 - 5.75 squared) x 15 = 44.0625 pi, and the solid cylinder cross-section is pi x 1 squared, so the length is 44.0625 cm.
The iron volume is pi x (16 - 9) x 21 = 462 cm3, and at 8 g per cm3 that weighs 3696 g = 3.696 kg.
From pi x r squared x 40 = 61.6, the inner radius is 0.7 cm = 7 mm, and the outer radius is 8 mm, so the thickness is 1 mm.
Topic Section
20 solved MCQs shown directly below
The cone volume is (1 over 3) pi x 9 x 5 = 15 pi and the cylinder volume is pi x 4 x 4 = 16 pi, so the ratio is 15 : 16.
The radius is 8 cm and the slant height is sqrt(15 squared + 8 squared) = 17 cm, so the curved surface is pi x 8 x 17 = 136 pi cm2.
The slant height is sqrt(14 squared + 7 squared) = 15.65 cm, so the total surface area is pi x 7 x (7 + 15.65) = 498.35 cm2.
Rotating about the 3 cm side gives radius 4 cm and height 3 cm, so the volume is (1 over 3) pi x 16 x 3 = 16 pi cm3.
The radius is sqrt(10 squared - 8 squared) = 6 m, so the curved surface is pi x 6 x 10 = 60 pi m2 (the book prints cm2 in the options; the unit should be m2).
From (1 over 3) pi r squared x 24 = 1232, r = 7 cm, the slant height is sqrt(24 squared + 7 squared) = 25 cm, so the curved surface is pi x 7 x 25 = 550 cm2.
From pi r squared = 1.54, r = 0.7 km, so the height is sqrt(2.5 squared - 0.7 squared) = 2.4 km.
From pi r squared = 3850, r = 35 cm, the slant height is sqrt(35 squared + 84 squared) = 91 cm, so the curved surface is pi x 35 x 91 = 10010 cm2.
The slant height is 40040 over (pi x 70) = 182 cm, the height is sqrt(182 squared - 70 squared) = 168 cm, so the volume is (1 over 3) pi x 4900 x 168 = 862400 cm3.
With r = 3x and h = 4x, (1 over 3) pi x 9x squared x 4x = 12 pi x cubed = 96 pi gives x = 2, so r = 6 cm and h = 8 cm, and the slant height is 10 cm.
From pi r squared = 346.5, r = 10.5 m, the slant height is sqrt(14 squared + 10.5 squared) = 17.5 m, the curved surface is pi x 10.5 x 17.5 = 577.5 m2, and 577.5 over 1.1 = 525 m of canvas.
Volume scales with radius squared times height, so doubling both gives 2 squared x 2 = 8 times.
The new volume factor is 1.2 cubed = 1.728, an increase of 72.8%, given as 72% among the options.
The height factor is 3 and the radius factor is 0.5, so the volume factor is 3 x 0.25 = 0.75, a decrease of 25%.
Volume is proportional to height when the radius is fixed, so doubling the height doubles the volume, a ratio of 1 : 2.
Volume ratio = (3 squared x 1) : (1 squared x 3) = 9 : 3 = 3 : 1.
With equal volumes, height is inversely proportional to radius squared, so the height ratio is 1 over 4 : 1 over 1 = 1 : 4.
Height ratio = (volume ratio) over (diameter ratio squared) = (1 over 4) over (16 over 25) = 25 : 64.
The largest cone has radius 3.5 cm and height 7 cm, so its volume is (1 over 3) pi x 12.25 x 7 = 89.8 cm3.
With r = 5x and h = 12x, the slant height is 13x, so the cylinder total surface is 2 pi x 5x x 17x = 170 pi x squared and the cone total surface is pi x 5x x 18x = 90 pi x squared, a ratio of 170 : 90 = 17 : 9.
Spotted an error?
Every question and answer on this page is checked before publishing. If you still find a mistake, tell us on WhatsApp and we will fix it.
Questions
No. This is a GK360 practice set prepared for exam preparation — it is not an official past paper. It is published for preparation, with verified answers and explanations.
Cube edge, volume and surface-area ratios; cylinder volumes, curved and total surface areas, wells, tanks, pipes, hollow tubes and rollers, wire drawing and melting coins; and cone volumes, curved and total surface areas, slant heights, conical tents and mountains, scaling and ratio problems, and the largest cone cut from a cube.
Yes. Every answer was re-solved from scratch — cube-root and square scaling, cylinder and cone volume and surface-area formulas, annulus volumes for hollow pipes and rollers, and ratio algebra — and checked against the book's printed Answer Key on p. 773. 24 key errors were corrected to the standard answer, including a key letter that does not exist among the options, and two unanswerable items were dropped.
Volume and surface-area problems appear in the arithmetic and general-ability sections of FPSC, PPSC, NTS, PTS and CSS MPT one-paper exams, so the same formulas and scaling rules apply across all of them.
Explore GK360
Use these important GK360 sections to prepare for PPSC, FPSC, one paper exams, subject-wise MCQs, solved past papers and current affairs.